Configure Operator Phone 7931

Unanswered Question
Nov 14th, 2008

Dear All,

I have implemented IPTX in my office. I need to configure operator phone (7936) with buttons. Can anybody help me in this regard.

Below is the configuration of the ephone-dn and ephone of the operator.

!

ephone-dn 11 dual-line

number 4250

label AHMED AL KHWAJA

name AHMED AL KHWAJA

call-forward busy 4000

call-forward noan 4000 timeout 20

hold-alert 30 originator

!

!

!

ephone 18

device-security-mode none

mac-address 001B.D4C7.1184

username "T4250"

type 7931

button 1:11

!

Waiting for your response.

Regards,

Malik.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
tiger_401 Fri, 11/14/2008 - 21:26

Hi,

Can anybody guide me in this regard or can anybody give me sample configuration of that i would have an idea.

Thanks,

Regards,

Malik.

allan.thomas Sat, 11/15/2008 - 18:14

Hi Malik, I already replied to this question in a different post. Here it is:-

In order for 7931 to use Directories, Settings you have need to assign a specific template.

There are two button-sets for the 7931, button-set 1 and button-set 2, the later provides directory access.

See the button-set command from this CME guide:-

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_b1ht.html#wp1021058

After you assign the template to the ephone-dn, these additional buttons will be on the handset.

ephone-template 1

softkeys idle Newcall Redial Pickup Dnd Gpickup Cfwdall

softkeys seized Redial Endcall Cfwdall Gpickup Pickup

softkeys alerting Endcall Callback

softkeys connected Endcall Hold Trnsfer Confrn Park

softkeys ringing Answer Dnd

button-layout 7931 2

ephone 18

ephone-template 1

Also take a look at this document, it discusses changing fixed line feature buttons for the 7931:-

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html

Hope this helps

Allan.

Pls rate helpful posts.

Actions

This Discussion