Hi guys, I own a pair of Cisco ASA 5510 running version 8.x of PIX-OS in an Active/Passive failover setup, configured as router on a stick with redundant interfaces. 

shield1(config)# sh int outside 
Interface Redundant1.100 "outside", is up, line protocol is up 
... 

I would like to meter incoming and outgoing traffic on all VLANs but I was unable to locate the correct SNMP OID to poll. 

Anyone know if this is supported? 

Thanx a lot in advance for you help. 

Best, 

Emanuele