ASA Phone Proxy

Unanswered Question

I'm trying to setup this feature on ASA 5505 and phone can successfully download a configuration file, but it can't register to CUCM server.

I can see the following message from debug inspection tls-proxy:

TLSP d5087d20: Using trust point '_internal_myctl_SAST_0' with the Client, RT proxy d5491f90

TLSP d5087d20: Waiting for SSL handshake from Client outside:

TLSP d5087d20: --> Proxy Rx 52 bytes

TLSP d5087d20: <== Proxy Tx 7 bytes

TLSP d5087d20: new event: KILL_FLOW

TLSP d5087d20: new event: KILL_FLOW

TLSP d5087d20: Tear down proxy for Client outside:

TLSP d5087d20: Tear down proxy for Server inside:

Config attached.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gogasca Sun, 11/16/2008 - 23:55

Under CUCM server is the CUCM with an IP address or using name and DNS suffix configured?

Is the Cisco UCM Cluster secure or non-secure?

what is the message displayed in the IP Phone when attempting to register?

What is the message for Phone status messages?

Which Phone model?


ezerangue Fri, 11/21/2008 - 08:59

I see the 192.168 is outside, and 172.22 is inside? You show the callmanager ip's to be

record-entry cucm-tftp trustpoint tftp_server address

record-entry cucm trustpoint sec_cucm address

record-entry cucm trustpoint pri_cucm address

Are these the actual ip address of Callmanager?


This Discussion