Group password recovery in the Cisco 3030

Unanswered Question
Nov 17th, 2008
User Badges:

I have about 20 groups in a failed concentrator that I need to recover the group password for. This is from the concentrator and the passwords are in hex. I do not have access to the clients which I can decode. Anybody know tips on decoding the cli group passwords in a 3030?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ajagadee Mon, 11/17/2008 - 09:55
User Badges:
  • Cisco Employee,

Hi,


I hope the below information helps.


Under Administration-->Access Rights -->Access Settings



Config File Encryption : check NONE , Then Apply.



---------------------------


The file can be viewed from following Tab



Administration ---> File Management


You will the config file and config backup file. There is very "view" button that you can click to view the file now.


http://www.cisco.com/en/US/docs/security/vpn3000/vpn3000_41/administration/guide/access.html#wp1416303


** Snapshot from the Lab VPN3000 ***


[group 3]

name=Netpro

password=netpro



Regards,

Arul


** Please rate if it helps **

rtuttle Mon, 11/17/2008 - 11:38
User Badges:

That was it, thanks I knew there was a way to do that.


R

ajagadee Mon, 11/17/2008 - 20:58
User Badges:
  • Cisco Employee,

Richards,


Glad to help. Can you also mark the post has solved, so other Netpro members can look up "solved posts" for quick answers.


Thanks,

Arul

shivainnetpro Thu, 11/20/2008 - 10:15
User Badges:

Arul,


I have tried similar steps for my VPN 3000 but it didn't worked out. Do you have any clue on this ..


Thanks,

Shiva

tjaden1434 Wed, 03/11/2009 - 14:43
User Badges:

Does this work on a VPN 3000? I am in a similar situation.


Thanks,

Jake

Actions

This Discussion