cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
590
Views
2
Helpful
1
Replies

WLAN DMZ on Cisco 877

jaccorens
Level 1
Level 1

Hello,

I have a pretty basic setup with an cisco 877 for routing our lan over adsl. Now we want to have an public wlan available in our shop. I think I need to set-up an 2nd vlan, and use that with Eth3 to hook up the accesspoint. Can anyone explain me the steps to create an dmz set-up on the 877 for this? I'm only beginner in cisco configs.

1 Reply 1

aghaznavi
Level 5
Level 5

The connection to the Internet is over a serial line. Ethernet 0 is connected to the internal network (a single LAN). Ethernet 1 is connected to a DMZ network, which has a single node used to provide services to the outside world. The ISP has assigned the company the netblock 192.168.27.0/24. This is equally split between the DMZ and the internal LAN with subnet mask 255.255.255.128.

For further information about configure DMZ interface click this link.

http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_configuration_example09186a0080094111.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: