Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1163
Views
0
Helpful
5
Replies

Red light doesn't flash after received the call or vm

Go to solution
xzjleo2005
Level 1
Level 1

‎11-17-2008 10:01 PM - last edited on ‎03-25-2019 06:57 PM by Community Manager

Hi

The red light doesn't flash on our 7941 and 7961 after a missing call come or leave a voice message. Does anyone could show me how to troubleshoot or should I configure anything on CUCM and Unity?

CUCM version: 4.1

IP phone firmware: SCCP41.8-3-3S

Thanks. Leo

Labels:
0 Helpful
2 Accepted Solutions

Accepted Solutions

Go to solution
tim.giles
Level 4
Level 4

‎11-18-2008 01:16 AM

Hi,

I've attached a troubleshooting guide for MWI problems. Make sure the on/off triggers are set in CCM and the ports are configured properly in Unity.

Solutions for Cisco Unity Message Waiting Indicator Problems:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080711ae3.shtml

Cisco Unity Troubleshooting Guide - Message Warning Indicators (MWI's):

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/troubleshooting/guide/ex/tsg_0500.html

Does it work for all the other phone models?

Please rate useful posts...

View solution in original post

0 Helpful

Go to solution
phartl
Level 1
Level 1
In response to tim.giles

‎11-18-2008 01:21 AM

It could be a restriction problem ! Be shure you have the MWI Ports in the right Partition/CSS

View solution in original post

0 Helpful
5 Replies 5

Go to solution
tim.giles
Level 4
Level 4

‎11-18-2008 01:16 AM

Hi,

I've attached a troubleshooting guide for MWI problems. Make sure the on/off triggers are set in CCM and the ports are configured properly in Unity.

Solutions for Cisco Unity Message Waiting Indicator Problems:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080711ae3.shtml

Cisco Unity Troubleshooting Guide - Message Warning Indicators (MWI's):

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/troubleshooting/guide/ex/tsg_0500.html

Does it work for all the other phone models?

Please rate useful posts...

0 Helpful

Go to solution
phartl
Level 1
Level 1
In response to tim.giles

‎11-18-2008 01:21 AM

It could be a restriction problem ! Be shure you have the MWI Ports in the right Partition/CSS

0 Helpful

Go to solution
xzjleo2005
Level 1
Level 1
In response to phartl

‎11-18-2008 09:14 PM

Thanks. I change the CSS configuration and now the red lamp will turn on when receiving message. But can the red lamp will be turn on as well when there is a miss call?

Leo

0 Helpful

Go to solution
phartl
Level 1
Level 1
In response to xzjleo2005

‎11-18-2008 11:13 PM

No, the MWI will be triggered by the uniy or unity connection ! patrick

0 Helpful

Go to solution
xzjleo2005
Level 1
Level 1
In response to phartl

‎11-19-2008 02:19 PM

Understand, thanks.

Leo

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents