Traffic-shape rate is max to 100Mbps?

gwhuang5398 · ‎11-18-2008

I want to shape traffic out of a GigE interface to 200Mbps, but the "traffic-shape rate" command only max up to 100Mbps. Is there a way to work around it?

Thanks a lot

Giuseppe Larosa · ‎11-18-2008

Hello Gary,

depending on the platform and IOS release you could be able to use modular QoS instead with the Class Based Shaping that shouldn't have this limitation.

So what is your device ? What IOS image is running ?

Hope to help

Giuseppe

gwhuang5398 · ‎11-18-2008

Hi, it's a 3825 router running 12.4 (17). Really appreciated if you have a sample config.

Thanks

Joseph W. Doherty · ‎11-18-2008

Something like this (NB: syntax might be off)

policy-map yournamehere

class class-default

shape average 200000000

interface gigE #

service-policy out yournamehere

PS:

Do note, although 3825 has gig interfaces, it doesn't have the performance to sustain such a high bandwidth. If fact, it's likely to have some difficulity with your 200 Mbps.