International Call configuration on T1 (CAS) - CM 4.2

Unanswered Question
Nov 18th, 2008
User Badges:

Need some insight on how to configure T1 CAS for international calls outgoing.

Dial-peer configuration is as follows:


dial-peer voice 120 pots

description International

numbering-type international

destination-pattern +011T

port 0/1/0:1

forward-digits all


Using CM 4.2 with a route pattern 9.011!#

discard digits predot Trailing-#.


we also tried adding a route filer to the pattern to include the international access, country code, etc.




We are Receiving a busy signal.


Also when dialing through the gateway it does not show any matching dial-peer.


Thank you for the assist


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Brandon Buffin Tue, 11/18/2008 - 12:16
User Badges:
  • Purple, 4500 points or more

Change your dial peer to:


destination-pattern 011T



Brandon

tpatten Tue, 11/18/2008 - 12:43
User Badges:

Thank you for the quick response. We made this change and added the "^". This has fixed the connection issue.

Actions

This Discussion