11-18-2008 11:09 PM - edited 03-04-2019 12:24 AM
Hi
I am relativly new ISDN and i was wondering how i would go about doing some sort of CLI verification on a number that has dialed into the router via an isdn pri line.
Regards Brad
Solved! Go to Solution.
11-20-2008 05:12 AM
Hello Brad,
what is your current logging level ?
use sh logging to see your current setup.
sh isdn history could be helpful too
Hope to help
Giuseppe
11-18-2008 11:54 PM
Hello Brad,
the isdn caller command given int interface serx/y:15 (E1 channel D) or serx/y:23 (T1 channel D) could be useful.
If using DDR the command can be given under interface dialer.
Hope to help
Giuseppe
11-19-2008 03:49 PM
Giuseppe
Thanks for your feedback, i will give it a go.
Regards Brad
11-19-2008 10:02 PM
Solution works brilliantly, however is there some way to log reject calls? as i cant see them in the log file.
11-20-2008 05:12 AM
Hello Brad,
what is your current logging level ?
use sh logging to see your current setup.
sh isdn history could be helpful too
Hope to help
Giuseppe
11-20-2008 03:06 PM
Giuseppe
Thanks for your reply. i very much appreciate your help. My logging is currently set to informational which i will adjust to suite our needs.
Regards Brad
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: