11-18-2008 11:09 PM - edited 03-04-2019 12:24 AM
Hi
I am relativly new ISDN and i was wondering how i would go about doing some sort of CLI verification on a number that has dialed into the router via an isdn pri line.
Regards Brad
Solved! Go to Solution.
11-20-2008 05:12 AM
Hello Brad,
what is your current logging level ?
use sh logging to see your current setup.
sh isdn history could be helpful too
Hope to help
Giuseppe
View solution in original post
11-18-2008 11:54 PM
the isdn caller command given int interface serx/y:15 (E1 channel D) or serx/y:23 (T1 channel D) could be useful.
If using DDR the command can be given under interface dialer.
11-19-2008 03:49 PM
Thanks for your feedback, i will give it a go.
11-19-2008 10:02 PM
Solution works brilliantly, however is there some way to log reject calls? as i cant see them in the log file.
11-20-2008 03:06 PM
Thanks for your reply. i very much appreciate your help. My logging is currently set to informational which i will adjust to suite our needs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
