cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
497
Views
5
Helpful
5
Replies

Caller ID validation using a cisco 3725

brad.hodges
Level 1
Level 1

Hi

I am relativly new ISDN and i was wondering how i would go about doing some sort of CLI verification on a number that has dialed into the router via an isdn pri line.

Regards Brad

1 Accepted Solution

Accepted Solutions

Hello Brad,

what is your current logging level ?

use sh logging to see your current setup.

sh isdn history could be helpful too

Hope to help

Giuseppe

View solution in original post

5 Replies 5

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Brad,

the isdn caller command given int interface serx/y:15 (E1 channel D) or serx/y:23 (T1 channel D) could be useful.

If using DDR the command can be given under interface dialer.

Hope to help

Giuseppe

Giuseppe

Thanks for your feedback, i will give it a go.

Regards Brad

Solution works brilliantly, however is there some way to log reject calls? as i cant see them in the log file.

Hello Brad,

what is your current logging level ?

use sh logging to see your current setup.

sh isdn history could be helpful too

Hope to help

Giuseppe

Giuseppe

Thanks for your reply. i very much appreciate your help. My logging is currently set to informational which i will adjust to suite our needs.

Regards Brad

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: