CME using E1 8 channels use a channel for an ISDN device?

Answered Question
Nov 19th, 2008

Hi, not sure if its possible but I'll try to explain.


A customer of ours has a Call Manager Express with an E1 and 8 channels on the ISDN 30 that we put in. My question is, is it possible to provide off the 8 channels a dedicated channel for a separate ISDN device? So 7 channels for the phone system and a channel for an ISDN device? The ISDN device is something to do with a security system a company uses to connect in to view the cameras ?



Any help would be greatly appreciated.


Thanks,


Craig.


Correct Answer by Rob Huffman about 8 years 3 months ago

Hi Craig,


There will be no way to strip out 1 of the 8 channels that I know of.


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Wed, 11/19/2008 - 07:00

Hi Craig,


There will be no way to strip out 1 of the 8 channels that I know of.


Hope this helps!

Rob

Rob Huffman Wed, 11/19/2008 - 07:11

Hey Craig,


You are most welcome buddy! We always get these strange requests don't we ;-)


Cheers!

Rob

Actions

This Discussion