11-19-2008 04:06 AM - edited 03-15-2019 02:38 PM
Hi, not sure if its possible but I'll try to explain.
A customer of ours has a Call Manager Express with an E1 and 8 channels on the ISDN 30 that we put in. My question is, is it possible to provide off the 8 channels a dedicated channel for a separate ISDN device? So 7 channels for the phone system and a channel for an ISDN device? The ISDN device is something to do with a security system a company uses to connect in to view the cameras ?
Any help would be greatly appreciated.
Thanks,
Craig.
Solved! Go to Solution.
11-19-2008 07:00 AM
Hi Craig,
There will be no way to strip out 1 of the 8 channels that I know of.
Hope this helps!
Rob
11-19-2008 07:00 AM
Hi Craig,
There will be no way to strip out 1 of the 8 channels that I know of.
Hope this helps!
Rob
11-19-2008 07:07 AM
Thanks for letting me know Rob.
11-19-2008 07:11 AM
Hey Craig,
You are most welcome buddy! We always get these strange requests don't we ;-)
Cheers!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: