vpn-authentication

Unanswered Question
Nov 19th, 2008
User Badges:

In the vpn client : user authentication when i enter the username & password, the username & the password does not get authentified, what command should i put in the PIX 515E.

Please wait for help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vmoopeung Wed, 11/26/2008 - 14:53
User Badges:
  • Bronze, 100 points or more

To enable the authentication you are prompted for a username and password which is sent to the TACACS or RADIUS server. You can log into the PIX with TACACS or RADIUS and enable through TACACS or RADIUS with the same username/password because the authentication packet for enable is the same as the authentication packet for login.

pix(config)#aaa-server topix protocol radius


pix(config)#aaa-server topix host 10.31.1.41 cisco timeout 5


pix(config)#aaa authentication enable console topix


http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807349e7.shtml#conf


Actions

This Discussion