11-19-2008 11:16 AM - edited 03-15-2019 02:39 PM
All,
I am wondering if CME POTS dial-peer has '#' sign as its default termination key.
I found in CME VOIP dial-peer, it will recognize '#' as default termination key which stop T302 timeout timing.
ie, I have dial-peer voice 999 voip
destiantion-pattern 25T
when I dial '2550#' in one of ephone, it will ring remote x2500 immediately.
For POTS dial-peer, I cannot confirm '#' sign as default key.
Can anyone confirm for me?
This will affect the dial-peer setup.
Solved! Go to Solution.
11-19-2008 11:59 AM
Yes, # is the termination character for POTS dial peers when using T in the destination pattern.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml
Hope this helps.
Brandon
11-19-2008 11:59 AM
Yes, # is the termination character for POTS dial peers when using T in the destination pattern.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml
Hope this helps.
Brandon
11-20-2008 07:45 AM
Great - good man Brandon.
thanks - also rate for 5.
In summary:
By default both CCM and CME/SRST IOS support '#' sign as termination for timer.
In CCM, it works with wildcard '!' and '@'.
In IOS, it works with 'T'.
James
11-20-2008 07:56 AM
James,
You are correct. Thanks for the rating.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide