Solved: CME termination sign # with dial-peer?

jamesfang98 · ‎11-19-2008

All,

I am wondering if CME POTS dial-peer has '#' sign as its default termination key.

I found in CME VOIP dial-peer, it will recognize '#' as default termination key which stop T302 timeout timing.

ie, I have dial-peer voice 999 voip

destiantion-pattern 25T

when I dial '2550#' in one of ephone, it will ring remote x2500 immediately.

For POTS dial-peer, I cannot confirm '#' sign as default key.

Can anyone confirm for me?

This will affect the dial-peer setup.

Brandon Buffin · ‎11-19-2008

Yes, # is the termination character for POTS dial peers when using T in the destination pattern.

Hope this helps.

Brandon

Brandon Buffin · ‎11-19-2008

Yes, # is the termination character for POTS dial peers when using T in the destination pattern.

Hope this helps.

Brandon

jamesfang98 · ‎11-20-2008

Great - good man Brandon.

thanks - also rate for 5.

In summary:

By default both CCM and CME/SRST IOS support '#' sign as termination for timer.

In CCM, it works with wildcard '!' and '@'.

In IOS, it works with 'T'.

James

Brandon Buffin · ‎11-20-2008

James,

You are correct. Thanks for the rating.

Brandon