How to create VPN in PIX 535 Multicontext environment?

Unanswered Question
Nov 19th, 2008
User Badges:

I have configured 2 PIX 535 firewalls in failover (Software 8.0) with multicontext configuration. There are 2 context created. It's running fine. However Crypto map and ISAKMP commands couldn't be supported on this. So it became impossible to create VPN. Pls suggest.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
cpembleton Wed, 11/19/2008 - 19:18
User Badges:
  • Silver, 250 points or more

That is one of the downsides of running multiple contexts. No VPN capabilities.


Don't use multiple contexts or use some other hardware like a router or fwsm.


Chad

Farrukh Haroon Wed, 11/19/2008 - 20:07
User Badges:
  • Red, 2250 points or more

Hello Pankaj, currently VPNs,dynamic routing,QoS etc. are not supported in multiple context mode. You have to either use single mode or find another device to terminate the VPNs.


Or find a gun to shoot the ASA coders :).


Regards


Farrukh

Actions

This Discussion