voice dsp's and codecs

Unanswered Question
Nov 20th, 2008

Hi all, trying to understand a bit more about dsp resources.

I have a 2821 which if you issue the command "sh diag",tells me I have in slot 0 a PVDM2-32 in slot 0 and similarly in slot1.

when I issue the command sh voice dsp group all" I get:

DSP groups on slot 0:

dsp 1:

State: UP, firmware: 4.4.10

Max signal/voice channel: 16/16

Max credits: 240

Group: FLEX_GROUP_VOICE, complexity: FLEX

Shared credits: 30, reserved credits: 0

Signaling channels allocated: 16

Voice channels allocated: 8

Credits used: 210

Voice channels:

Ch01: voice port: 0/0/0:15.3, codec: g711ulaw, credits allocated: 30

Ch02: voice port: 0/0/0:15.7, codec: g729br8, credits allocated: 30

Ch03: voice port: 0/0/0:15.24, codec: g729br8, credits allocated: 30

Ch04: voice port: 0/0/0:15.27, codec: g711ulaw, credits allocated: 15

Ch05: voice port: 0/0/0:15.10, codec: g711ulaw, credits allocated: 30

Ch06: voice port: 0/0/0:15.1, codec: g711ulaw, credits allocated: 30

Ch07: voice port: 0/0/0:15.25, codec: g711ulaw, credits allocated: 15

Ch08: voice port: 0/0/0:15.9, codec: g729br8, credits allocated: 30

dsp 2:

State: UP, firmware: 4.4.10

Max signal/voice channel: 16/16

Max credits: 240

Group: FLEX_GROUP_VOICE, complexity: FLEX

Shared credits: 90, reserved credits: 0

Signaling channels allocated: 0

Voice channels allocated: 0

Credits used: 0

Voice channels:

dsp 5:

State: UP, firmware: 4.4.10

Max signal/voice channel: 16/16

Max credits: 240

Group: FLEX_GROUP_VOICE, complexity: FLEX

Shared credits: 120, reserved credits: 0

Signaling channels allocated: 0

Voice channels allocated: 0

Credits used: 0

Voice channels:

dsp 6:

State: UP, firmware: 4.4.10

Max signal/voice channel: 16/16

Max credits: 240

Group: FLEX_GROUP_VOICE, complexity: FLEX

Shared credits: 105, reserved credits: 0

Signaling channels allocated: 0

Voice channels allocated: 0

Credits used: 0

Voice channels:

DSP groups on slot 1:

This command is not applicable to slot 1

DSP groups on slot 2:

This command is not applicable to slot 2

Questions:

why dsp 1,2,5,6 what happened to 3,4

I take it the pvdm's in slot 0 and 1 referenced in the sh diags, are just grouped together in the show voice dsp group command?

I thought g729br8 was a high complex codec, but if so why does it get allocated 30 credits, if 240 credits is the max per dsp then thats 8 g729br8's, i thought the max was 6 per 2-16 dsp?

What happens if you use all the credits on your dsp's, but still have spare channels, would a call in be refused?

thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion