Unsecured wireless network

Answered Question
Nov 20th, 2008

Hi All,

Please how can I secure my wireless network with the following running config:

no aaa new-model

dot11 syslog

!

dot11 ssid ************

authentication open

guest-mode

interface Dot11Radio0/3/0

no ip address

!

ssid *********

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0

54.0

channel 2412

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 spanning-disabled

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

Thank you all!

Law

I have this problem too.
0 votes
Correct Answer by jeff.kish about 8 years 1 week ago

What kind of security do you want to use? WPA-PSK with AES? If so, perform the following config:

dot11 ssid *******

authentication key-management wpa

wpa-psk ascii [password]

int dot0/3/0

encryption mode ciphers aes-ccm

Try that and see if it works. Hopefully it does!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
jeff.kish Thu, 11/20/2008 - 11:21

What kind of security do you want to use? WPA-PSK with AES? If so, perform the following config:

dot11 ssid *******

authentication key-management wpa

wpa-psk ascii [password]

int dot0/3/0

encryption mode ciphers aes-ccm

Try that and see if it works. Hopefully it does!

sr2470182 Fri, 11/21/2008 - 07:14

Thanks Jeff,

It works fine.

Meanwhile I have posted another question about DHCP configuration on WAP

Cheers!

Actions

This Discussion