11-23-2008 09:43 AM
-how to configure lms such that it will only discover devices thru their loopbak0 ip address
-is it a configuration on the device itself that is needed to achieve this objective. if it is, then what are the needed configurations.
12-01-2008 09:37 AM
Device Discovery populates the Device and Credentials Repository with the Host name, Domain name, Management IP address, Display name, and sysObjectID
Getting Started with LAN Management Solution:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.0/install/guide/getstart.html
You can configure Device Discovery from Campus Manager > Admin > Device Discovery > SNMP Settings.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_campus_manager/5.0/user/guide/cmugfull.pdf
12-01-2008 09:54 AM
I answered this in http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc26eb2 . Discovery uses the loopback with the highest IP address. If you number your lo0 interfaces such that they have the highest IP of any loopback, then that will be the address Discovery uses.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
