WEP to WPA

Unanswered Question
John Blakley Mon, 11/24/2008 - 11:51

If you want to use just one vlan, then you would need to set under your SSID:

authentication open

authentication key-management wpa

wpa ascii key

Under your radio interface:

int do0

encryption vlan 1 mode ciphers tkip

HTH,

John

John Blakley Tue, 11/25/2008 - 03:34

Yes. When the clients "switch over", they're going to lose association with the AP. You'll have to change the encryption type under the client from wep to wpa-psk (if windows).

HTH,

John

John Blakley Wed, 11/26/2008 - 05:10

You may be able to do that, or through GPO, but I'm not a big Microsoft guy. You'll probably want to contact them to see if there's a way to do this through scripting of some kind. Otherwise, you'll need to send a message out to all of your users describing how to switch over to the new security method.

HTH,

John

Actions

This Discussion