11-24-2008 12:26 AM - edited 03-15-2019 02:42 PM
What does it mean "Rejected" in CUCM 6?
In Callmanager 4 I saw only Registered/Not registered messages?
11-24-2008 01:01 AM
Hi,
I think you would have got this in previous CCM versions as well.
Try a "no mgcp" on the router, then "mgcp" to re-apply to config, hopefully then it should register on CCM then.
Also go through these troubleshooting steps, they may be of some use if you've applied an "ip domain name" to the router:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805a316c.shtml
Please rate useful posts..
11-24-2008 02:41 AM
Do a debug mgcp packets- this will show, perhaps helps in why it was rejected- if it responds with 500 it will be the name of the GW - check if you have domain name set on the gateway e.g -cisco.com if so add it on the CUCM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide