I have PIX-515E with:
Cisco PIX Security Appliance Software Version 8.0(2)
Device Manager Version 6.0(2)
I can't connect from host 192.168.2.6 using ssh through VPN to inside interface.
Here you are my running config:
ssh 192.168.2.0 255.255.255.0 inside
In the log I can find this:
Nov 24 2008 13:28:08: %PIX-6-302013: Built inbound TCP connection 527654 for outside:192.168.2.6/1499 (192.168.2.6/1499) to NP Identity Ifc:172.22.1.1/22 (172.22.1.1/22)
Nov 24 2008 13:28:08: %PIX-6-302014: Teardown TCP connection 527654 for outside:192.168.2.6/1499 to NP Identity Ifc:172.22.1.1/22 duration 0:00:00 bytes 0 Flow terminated by TCP Intercept
An ssh debug:
Device ssh opened successfully.
SSH1: SSH client: IP = '192.168.2.6' interface # = 6
SSH: host key initialised
SSH1: starting SSH control process
SSH1: Exchanging versions - SSH-1.99-Cisco-1.25
SSH1: send SSH message: outdata is NULL
server version string:SSH-1.99-Cisco-1.25
SSH1: Session disconnected by SSH server - error 0x3c "Time-out activated"
SSH1: receive SSH message: [no message ID: variable *data is NULL]
SSH1: receive unsuccessful - status 0x3c
The same situation is with ASDM.
Other communicaton works well (snmp from this server to PIX works fine).
Could you help me ?
Thanks in advance for help
If you have already checked your configuration and logs and do not see anything wrong with it, then you are most likely running into Bug ID CSCsi79159.
admin connections to PIX with crypto card via management-access fail
The above bug is fixed in 8.0(4)
*Pls rate if it helps*