Ports open on PIX

Answered Question
Nov 24th, 2008
User Badges:

Hi,


Can someone tell me the commands/access-lists on PIX to allow the below:


source: 10.10.2.3

destination: x.x.x.20

ports: 21,23,1530, 18102, 18103


Please give me the commands to run on PIX?


Regards,


Vin

Correct Answer by ajagadee about 8 years 5 months ago

Vinay,


access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 21

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 23

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 1530

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18102

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18103


Regards,

Arul


*Pls rate if it helps*

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
ajagadee Mon, 11/24/2008 - 06:50
User Badges:
  • Cisco Employee,

Vinay,


access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 21

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 23

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 1530

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18102

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18103


Regards,

Arul


*Pls rate if it helps*

Actions

This Discussion