Configuration register is 0xF

Unanswered Question
Nov 24th, 2008
User Badges:

Hi Guys,


I have made some changes to the switches and the I save the config. After few days there was an power outage and when the switches restarted it lost all the changes I made.


The switch is set to

Configuration register is 0xF


what does the above mean.


If this is not correct what value should I used so that it can use the changes which I made next time when it reboots.


Tks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
johnlloyd_13 Tue, 11/25/2008 - 08:43
User Badges:
  • Blue, 1500 points or more

what model and IOS for the switch? if it's a 2960, then 0xF is the default and recommended configuration register and is not changeable.

Actions

This Discussion