11-25-2008 01:20 AM - edited 03-15-2019 02:44 PM
Hi, I have an issue with Callmanager 6.1 and 7942`s and 7945`s using SRST version 3.3 on a 2801 router.
The phones fall back into SRST mode, but the phones lose their extension numbers, so are unable to make and receive calls.
From the compatibility docs, Cisco produce it would appear that version 3.3 does not support these phone models.
Does this mean a complete IOS upgrade to get the updated SRST or can you download some kind of component?
Hope you can help.
Solved! Go to Solution.
11-25-2008 01:59 AM
For IP Phone support in SRST for the 7942 and 7945 you will require at least SRST version 4.1.
Refer the SRST 4.1 Product Reference Guide:-
In particular, please refer to Table 7 of this document, it details which SRST version is available with a specific release of IOS. In your case v4.1 is available for release 12.4(14)T.
You may also find this document helpful, is various FAQs about SRST:-
Hope this helps
Allan.
11-25-2008 01:59 AM
For IP Phone support in SRST for the 7942 and 7945 you will require at least SRST version 4.1.
Refer the SRST 4.1 Product Reference Guide:-
In particular, please refer to Table 7 of this document, it details which SRST version is available with a specific release of IOS. In your case v4.1 is available for release 12.4(14)T.
You may also find this document helpful, is various FAQs about SRST:-
Hope this helps
Allan.
11-25-2008 11:21 AM
cheers for your reply!!!
much appreciated!!!
11-25-2008 12:55 PM
Hi Norman, it was no trouble at all, thanks for the appreciation. All the best.
Allan.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: