Input errors on Multilink interface

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
drolemc Tue, 12/02/2008 - 09:45
User Badges:
  • Silver, 250 points or more

Possible problems that might be causing the errors.

1. CRC errors occur when the CRC calculation does not pass (indicating that data is corrupted).

2. Aborts indicate an illegal sequence of 1 bit (more than seven in a row)

3. A framing error occurs when a packet does not end on an 8-bit byte boundary

For solution click this link.

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7304/73tblser.html#wp1040644


Actions

This Discussion