Unable to upgrade ios image using in Rme in LMS 3.1

Unanswered Question

Processing Device : 10.200.200.200

Start Time : Tue Nov 25 13:27:00 GMT 2008

Hello I am testing Lms 3.1 and having problems send configs and also ios upgrades I have checked My snmp setting on the devices and on the Server they are fine this is one of the messages i get.



Device is locked for exclusive access.


The supported protocols for image transfer are: RCP,TFTP,SCP



Connecting to the device using TELNET...

Couldn't connect to the device

Cause: SWIM5001: Cannot connect to the device 10.200.200.200 using TELNET.

Skipping the software upgrade on this device.

Image Copy Operation Failed


Device is unlocked.


Device Upgrade Result : Failed

End Time:Tue Nov 25 13:28:02 GMT 2008


Thanks for any assistance in advance

Marc Dowrich


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 11/25/2008 - 07:12
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

According to this, RME cannot telnet to the device. Make sure you have valid username/password credentials in DCR for this device, and that RME is allowed to telnet to it.

Actions

This Discussion