11-25-2008 09:03 AM
Hi,
Does any one have a method by which to get my CUCM Servers registared to LMS so I can see Phone numbers.
I have the Servers Registared fine but can not see the CUCM Cluster I have seen other Conversions mention.
Thanks
Ian
11-25-2008 09:54 AM
In order for Campus Manager to manage CCMs, they must first have the SNMP service enabled. Next, if the CCMS are running 5.x or higher code, you will need to upgrade to Campus Manager 5.1.1 before they will be supported. Then, add the CCMs to DCR with the appropriate SNMP read-only community string. When all the CCMs are added to DCR, then run a new Campus Data Collection. They should then appear as green Application Service icons on the Campus Topology Map. Once that is happening, you can run a User Tracking acquisition, and the phones will show up in User Tracking.
11-26-2008 03:05 AM
Hi,
Thanks for the info, I had all the pre-req's.
But did not have the SNMP Service started on the CUCM's, although I had updated the SNMP infor and the system reported it was restarting the SNMP Service.
Now seeing all the Phone info.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide