hello Cheng

no default gateway is configured on those servers

no firewall, default windows firewall is off.

no hardware firewall is implemented in this case.

and let me add the two servers configured with ip and subnet only with out default gateway.

i want these two servers to be connected to LAN with IP address 192.168.1.0/24 255.255.255.0

and the other network interfaces should be in different LAN with 10.1.1.0 255.0.0.0

any help ulitimatly appreciated.

Em.....can you shutdown one interface of 192.168.1.0/24 or 10.1.1.0/8 to ping another IP server.

I meaning shutdown 10.1.1.0/8 interface, use 192.168.1.0/24 interface to ping another server. Can you ping it? If you can, can you add vlan on switch? I think it is good for server.

by the way, can you check switch arp table is right?

hello

by the way iam using two different switches for each LAN

what do you think

thank you

Alaa

hello

i want to know if iam in the first server with 2 LAN interface 10.1.1.1 and 192.168.1.10

and i want to ping to another server with this config

10.1.1.2 , 192.168.1.20

ping to them failed, however each network in differernt switch.

what to do ping successfully

help please

Alaa

paste netstat -r

both servers

May be some vlan config on the switch.

Best Regards

Cheng