2960 switch problem

Unanswered Question
Nov 25th, 2008

Hi all,

I m facing the problem in reloading the IOS in switch by Xmodem.When i m trying to access the rmode then mesg is displayed "Access is denied".

Full message is given below:

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)

Compiled Mon 22-Jul-02 17:18 by antonino

WS-C2950G-48-EI starting...

Base ethernet MAC Address: 00:0b:46:e5:b2:00

Xmodem file system is available.

Initializing Flash...

flashfs[0]: 1 files, 1 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7741440

flashfs[0]: Bytes used: 1536

flashfs[0]: Bytes available: 7739904

flashfs[0]: flashfs fsck took 4 seconds.

...done initializing flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

Loading ""...: permission denied

Error loading ""

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically. The BOOT

environment variable needs to be set to a bootable

image.

switch: boot

Loading ""...: permission denied

Error loading ""

Interrupt within 5 seconds to abort boot process.

Boot process failed...

switch: copy xmodem c2950-i6q4l2-mz.121-12c.EA1

xmodem: permission denied

switch: copy xmodem c2950-i6q4l2-mz.121-12c.EA1 bin

xmodem: permission denied

switch:

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)

Compiled Mon 22-Jul-02 17:18 by antonino

WS-C2950G-48-EI starting...

Base ethernet MAC Address: 00:0b:46:e5:b2:00

Xmodem file system is available.

The system has been interrupted prior to initializing the

flash filesystem. The following commands will initialize

the flash filesystem, and finish loading the operating

system software:

flash_init

load_helper

boot

switch: copy xmodem c2950-i6q4l2-mz.121-12c.EA1

xmodem: permission denied

switch: set

switch: unset

usage: unset <variables...>

switch: unset boot

Variable boot" not set, or is readonly.

switch: unset manual_boot

Variable manual_boot" not set, or is readonly.

switch:

Regards,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Wed, 11/26/2008 - 01:47

Have you initialised flash before the xmodem process?

flash_init

load_helper

Narayan

Actions

This Discussion