11-26-2008 02:31 AM - edited 03-15-2019 02:46 PM
How I can hide internal number? CUCM 6
Forexample I want to display Unknown message only.
11-26-2008 03:22 AM
If you require the calling party number or name service to be restricted when dialing another internal called party, then you will need to configure a specific translation rule which is matched in your calling party's CSS when the outgoing call is made.
Refer to the Translation pattern configuration for Calling Line and Name presetation restriction:-
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmcfg/b03txpat.html#wpxref97194
Hope this helps.
Allan.
11-26-2008 05:56 AM
I am speaking about HIDING number, with somethikng like "Unknown". It's not similar that CSS accesses
11-26-2008 08:21 AM
Hi,
You can achieve this by doing the following:
1. Go to the gateway in question, scroll down to "call routing information-outbound calls"
2. Change the "calling party number presentation to Restricted
3. change the Calling party IE number type unknown to Unknown.
Hope this helps
11-26-2008 09:31 AM
please always look at previous posts
Call Display Restrictions
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmfeat/fshosp.html
HTH
java
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide