11-28-2008 01:24 AM - edited 03-15-2019 02:48 PM
11-28-2008 04:51 AM
CallerID is supported on H.323 with any version of CallManager, however as far as I know this is not the case for CallerID NAME.
If you require called-ID name, then you will require MGCP. The problem is that CCM
requires the called-name information delivered to it in the Display IE field and
almost all telco's send it in the Facility IE.
The other aspect to be aware of, is the caller-id is not supported for FXO modules controlled by MGCP, whereas H.323 does.
Hope this helps
Allan.
11-29-2008 11:39 AM
actually, with IOS 12.4(20) and higher you can now have caller-id name with h323.
http://www.cisco.com/en/US/docs/ios/12_4t/release/notes/124TNEWF.html#wp2039380
Robbie
12-01-2008 10:08 AM
Also your router needs to be a 2800 or 3800 series router to run IOS 12.4(20) and higher
-Robbie
12-15-2008 08:38 AM
If you are using a 3700 series chassis, Caller ID with name was implemented with 12.4(11)XW.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: