cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
485
Views
0
Helpful
4
Replies

CUCM 6.1 and H.323 with CallerID

volkovvalery
Level 1
Level 1

Hello!

Do's cucm support a CallerID on H.323 gateway's?

4 Replies 4

allan.thomas
Level 8
Level 8

CallerID is supported on H.323 with any version of CallManager, however as far as I know this is not the case for CallerID NAME.

If you require called-ID name, then you will require MGCP. The problem is that CCM

requires the called-name information delivered to it in the Display IE field and

almost all telco's send it in the Facility IE.

The other aspect to be aware of, is the caller-id is not supported for FXO modules controlled by MGCP, whereas H.323 does.

Hope this helps

Allan.

actually, with IOS 12.4(20) and higher you can now have caller-id name with h323.

http://www.cisco.com/en/US/docs/ios/12_4t/release/notes/124TNEWF.html#wp2039380

Robbie

Also your router needs to be a 2800 or 3800 series router to run IOS 12.4(20) and higher

-Robbie

If you are using a 3700 series chassis, Caller ID with name was implemented with 12.4(11)XW.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: