11-28-2008 10:37 AM - edited 03-15-2019 02:48 PM
Hi
How can I do to block the collect calls on E1 ISDN?
Thanks
11-28-2008 10:59 AM
Well you can use translation profiles on the GW itself.
If you are using CCM you can use FAC or just CSS/Partitions to avoid those numbers.
Give details of your topology to see exactly what can be done.
//J
11-28-2008 11:05 AM
Hi
I forgot a small great detail. Incoming Collect Calls....!!
Sorry
11-28-2008 11:00 AM
unless they all come using a known ANI ALL the time there is no way to do such thing
Reject Calls
Call Blocking Configuration Examples
if they do come all the time using the SAME ANI then you can use the above procedures.
HTH
java
if this helps, please rate
11-28-2008 11:57 AM
Hi Peterson,
You would normally work with your Telco/Provider to block these type of Collect calls. They have the ability to block these before they ever reach your setup. We went through this process with our Telco a few years ago and it works perfectly!
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide