11-29-2008 01:00 PM - edited 03-04-2019 12:32 AM
Hello all,
I've started for first time configuration of my new ADSL router (Cisco 837)
The issue is the router coudn't get an IP adress from DHCP server of me ISP
You can see attached :
- sh ver
- sh ip int br
- sh run
& sh dhcp server: witch show no requests go out!!
Any advices
Thanks
Solved! Go to Solution.
12-11-2008 02:00 PM
Hi tarik,
Under you ATM interface, explicity specify the encap and protocol using
interface ATM0
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
After configuring this (issue shutdown and no shutdown to restart the interface)
HTH
Lejoe
11-29-2008 04:44 PM
Hi Tarik,
Under dialer interface
remove ip address dhcp
and add
int dialer 0
ip address negotiated
this allows for the IP address of the dialer interface to be obtained via PPP/IPCP address negotiation
HTH
Lejoe
12-11-2008 10:32 AM
Hello Lejoe,
I've done it but same result: no ip @ even interfaces up (atm 0 & dialer 0)!!
So need help again
# Sorry for delay I was away ;-)
12-11-2008 02:00 PM
Hi tarik,
Under you ATM interface, explicity specify the encap and protocol using
interface ATM0
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
After configuring this (issue shutdown and no shutdown to restart the interface)
HTH
Lejoe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: