12-01-2008 12:06 AM - edited 03-15-2019 02:49 PM
CTI route point is not registering. I was wondering if it was because of the CSS. I ran the wizard initially but i am not sure if i generated the CSS correctly. Can some onetell me which partitions should be in which CSS. or rather which should not be. Currently there are two CSS controlled by IPMA everyone and Manager. All partitions are in both CSS including the route-point partition.
Solved! Go to Solution.
12-01-2008 08:45 AM
this diagram shows how you should have them:
Figure 23-8 Unified CM Assistant Proxy Line Mode Dial Plan Example
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cmapps.html#wp1043992
HTH
java
if this helps, please rate
12-01-2008 08:45 AM
this diagram shows how you should have them:
Figure 23-8 Unified CM Assistant Proxy Line Mode Dial Plan Example
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cmapps.html#wp1043992
HTH
java
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide