12-01-2008 06:16 AM - edited 03-15-2019 02:50 PM
Hi,
what signaling protocol is used between the voice gateways if I configure a dial peer like this:
dial-peer voice 10 voip
destination-pattern 91200....
session target ipv4:172.16.5.2
Thank you.
Peter
12-01-2008 07:09 AM
Peter,
This would be an H.323 call.
Hope this helps.
Brandon
12-01-2008 07:26 AM
Hi Brandon,
thank you for answering that quickly. Could you recommend a Cisco document on H.323 security pointing to something like "How to secure H.323 communication over the Internet"?
Thank you.
Peter
12-01-2008 01:45 PM
Peter,
The following link discusses securing H.323 media and signaling.
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htsecure.html
Hope this helps.
Brandon
12-01-2008 02:35 PM
Hi Brandon,
many thanks for the info.
Peter
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: