Boot Loader Imagen failed to upgadre

Answered Question
Dec 1st, 2008
User Badges:

Hi


I've been trying to upgrade the boot image of my WLC4402-12, even following the intructions in the Cisco documentation. The image is correctly transferred from the TFTP but when I reboot the WLC I just see the same old boot image.


Please see the attached picture. Y try the 5.2 main imagen as well as the boot or ER image.



Attachment: 
Correct Answer by Scott Fella about 8 years 3 months ago

Just remember, 4.2.112 is the last bootloder update.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Scott Fella Mon, 12/01/2008 - 18:40
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

That is a cosmetic bug on the wlc. As long as you didn't error during the upgrade you will be fine. 4.2.112.0 ER.aes file is the last ER file to contain a bootloader.


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml


Correct Answer
Scott Fella Mon, 12/01/2008 - 20:07
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Just remember, 4.2.112 is the last bootloder update.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode