Cisco SIP Phone : Lost password

Unanswered Question
Dec 2nd, 2008
User Badges:

Hi,


I have 2 Cisco Phone (7905G) with sip firmware.

I lost the configuration password. So I can't change network settings.


Is there a way to do a factory default reset ?


Thanx,

Bastien.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Restoring Factory Default Settings Perform the following steps to restore factory default settings when you forget the password.


Press *, 0, and the 4 softkey simultaneously. The manufacturing test-option screen appears.


Type 322873738# and press *.


Press *, 0, and the 4 softkey again, or power-cycle the phone. You return to normal operation.



Nicholas Matthews Fri, 12/12/2008 - 14:18
User Badges:
  • Red, 2250 points or more

Alternatively - and probably easier,


You can register the phone with SCCP, and then switch it back over to SIP. If you have a CUCM 5/6 this is probably the easiest option. If this is standalone you'll be better off with the factory reset.

Actions

This Discussion