cisco isr router with call manager express

Unanswered Question
Dec 2nd, 2008
User Badges:

we have a cisco 2811 running call manager express and if the router is rebooted then the ip broadcast address with whatever the broadcast address is appears automatically on both fastethernet ports and causes issues with the ip phones registring with the system, they jsut do not register when this command is in. the minute we take it off the phones register.

if we take this two commands out and save the config and reboot they re-appear again.

version is c2800nm-spservicesk9-mz.124-9.T7.bin

also tried it on c2800nm-spservicesk9-mz.124-15.T7.bin and still the same.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
irisrios Wed, 12/10/2008 - 14:58
User Badges:
  • Silver, 250 points or more

This is because you may not get .cnf file from CME.

cmelbourne Thu, 12/11/2008 - 04:33
User Badges:

thats sounds correct but do you know why the ip broadcast address keeps re-appearing even though i take it and then after a reboot it re-appears again?


This Discussion