cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
300
Views
0
Helpful
2
Replies

cisco isr router with call manager express

cmelbourne
Level 1
Level 1

we have a cisco 2811 running call manager express and if the router is rebooted then the ip broadcast address with whatever the broadcast address is appears automatically on both fastethernet ports and causes issues with the ip phones registring with the system, they jsut do not register when this command is in. the minute we take it off the phones register.

if we take this two commands out and save the config and reboot they re-appear again.

version is c2800nm-spservicesk9-mz.124-9.T7.bin

also tried it on c2800nm-spservicesk9-mz.124-15.T7.bin and still the same.

2 Replies 2

irisrios
Level 6
Level 6

This is because you may not get .cnf file from CME.

thats sounds correct but do you know why the ip broadcast address keeps re-appearing even though i take it and then after a reboot it re-appears again?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: