SNMP and OID

Unanswered Question
Dec 3rd, 2008

Hi,I am trying to poll a SNMP mib for bgp peer status from Kiwi CatTools. The Cisco OID I am trying to poll is 1.3.6.1.2.1.15.3 - bgpPeerTable. The Cisco Router I am using is a 2811 and IOS is c2800nm-entservicesk9-mz.124-10a.bin. I have basic ip connectivity and can gather things like system name, ios version etc., but cannot get the bgppeertable output - I need to collate the output of the peer status ie. show ip bgp summary from every node.

Where am I going wrong?

Any advice will be gratefully received.

Regards

Mary

snmp-server view novacm internet included

snmp-server view novacm bgp included

snmp-server view novacm internet.6.3.16 excluded

snmp-server community w2e37uh1 RW 99

snmp-server community cable-docsis view novacm RW 99

snmp-server host 10.82.124.200 w2e37uh1

RouterB#sh access-list 99

Standard IP access list 99

10 permit 10.82.124.200 (72 matches)

20 permit 19.46.240.64, wildcard bits 0.0.0.15 (100 matches)

30 permit 19.46.240.80, wildcard bits 0.0.0.15

Routerb#


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Stanford Wed, 12/03/2008 - 08:29

Keep in mind that the object bgpPeerTable is not-accessible.


Did you try to walk any of the objects contained in the table like bgpIdentifier? Do they respond?

maryodriscoll Wed, 12/03/2008 - 09:06

If the bgpPeerTable is not accessible - that means I will never be able to collate the results of the bgp peer output from either router on my network - is that correct?

Actions

This Discussion