SSM Configuration

Unanswered Question
Dec 4th, 2008
User Badges:

Right now I thought I had everything setup to do SSM but I can't seem to get things working right. I have two multicasts:


10.0.0.50 239.192.111.1

10.0.0.51 239.192.111.1


And whenever I subscribe to 239.192.111.1 with either of the source addresses in my include list I always get both of the multicasts routed to me. I can't seem to figure out the problem. What am I doing wrong? Here is my configuration.



version 12.2

no service pad

service timestamps debug uptime

service timestamps log uptime

!

!

no aaa new-model

clock timezone GMT 0

ip subnet-zero

ip routing

!

ip multicast-routing distributed

ip igmp snooping querier

!

!

!

no file verify auto

spanning-tree mode pvst

spanning-tree extend system-id

!

vlan internal allocation policy ascending

!

!

!

interface Vlan1

ip address 10.10.0.2 255.0.0.0

ip pim sparse-mode

ip igmp version 3

!

ip classless

ip http server

!

ip pim rp-address 10.10.0.2

ip pim ssm range 3

!

access-list 3 permit 224.0.0.0 15.255.255.255



Thanks,


Jason

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jdcompman1 Wed, 12/10/2008 - 08:18
User Badges:

Can someone please help me out or move this to the right spot if it is not in the right spot? I'm surely not the only one doing this. Any help would be greatly appreciated.


Thanks,


Jason

Actions

This Discussion