Right now I thought I had everything setup to do SSM but I can't seem to get things working right. I have two multicasts:
10.0.0.50 239.192.111.1
10.0.0.51 239.192.111.1
And whenever I subscribe to 239.192.111.1 with either of the source addresses in my include list I always get both of the multicasts routed to me. I can't seem to figure out the problem. What am I doing wrong? Here is my configuration.
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
!
!
no aaa new-model
clock timezone GMT 0
ip subnet-zero
ip routing
!
ip multicast-routing distributed
ip igmp snooping querier
!
!
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
interface Vlan1
ip address 10.10.0.2 255.0.0.0
ip pim sparse-mode
ip igmp version 3
!
ip classless
ip http server
!
ip pim rp-address 10.10.0.2
ip pim ssm range 3
!
access-list 3 permit 224.0.0.0 15.255.255.255
Thanks,
Jason
