12-04-2008 11:27 AM - edited 03-15-2019 02:55 PM
Hi Guys,
We lost the password administrator the service CAR. Is there any procedure to reset the password administrator to service CAR. The version of CallManager is 4.2.1.
Thank You,
Wilson Santana
Solved! Go to Solution.
12-05-2008 01:16 PM
ok, the procedure i already posted is used to reset the pwd from and admin user. if you don't know it you cannot log into CAR, if you want to add new users to admin group, you need to log into CAR
HTH
java
if this helps, please rate
12-04-2008 11:46 AM
Cisco CallManager: Restoring a Lost ART / CAR Password
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801115eb.shtml
HTH
java
if this helps, please rate
12-05-2008 10:06 AM
Hi Javalenc,
Thanks for the documentation.
In this doc explains how I can change the password of one user or reset the password of the admin user. But if I reset the admin password, I'll lost all users configured. Is it possible I discover or reset the admin password, without lost all configured users ?
Thanks a lot,
Wilson
12-05-2008 10:21 AM
????????? if you reset the password from the admin user, all you do is reset the password from an admin user!
i don't know who told you or why you're involving losing all the config just for resetting the pwd to get into CAR
you simply find a user thru DCD, go to CCM directory, reset the pwd, and that's it
HTH
java
if this helps, please rate
12-05-2008 11:07 AM
Hi Javalenc,
It's not clear. Our problem is, don't have the password administrador and only with passowrd administrator will can input new user, right? Could you send for me the procedure to include new users?
Thank You,
Wilson
12-05-2008 01:16 PM
ok, the procedure i already posted is used to reset the pwd from and admin user. if you don't know it you cannot log into CAR, if you want to add new users to admin group, you need to log into CAR
HTH
java
if this helps, please rate
12-05-2008 04:21 PM
Hi Javalenc,
After solved the problem with password administrator, I need know with I create a new user common. Do you understand?
Thank You,
WIlson
12-09-2008 10:59 AM
Hi Wilson,
Did you fix the issue? I have similar issue here, but I know the administrator pass but it user doesnt have enough previliges for see whole CAR paramenters, then I dont know how create or Revoking Administrator Rights.
Please advise.
Andres
12-10-2008 04:38 AM
Hi Andres,
In the really we found the user that had privilegious of Administrator and after we create a new user. Did you tryed to do this procedure bellow:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801115eb.shtml
Regards,
Wilson Santana
12-10-2008 05:57 AM
Thanks Wilson!
It really help me to fix the issue
Andres
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide