12-04-2008 12:17 PM - edited 03-04-2019 12:36 AM
I have a problem with the configuration of hwic-3d-gsm in a router 2801 ver. IOS 12.4 (22) T.
I do not accept the following command:
show all cellular 1/0/0
Why?
12-04-2008 12:19 PM
***********Sorry*************
I have a problem with the configuration of hwic-3d-gsm in a router 2801 ver. IOS 12.4 (22) T.
I dont accept the following command:
show cellular 1/0/0 all
Why?
05-07-2009 01:46 AM
Which slot did you put your HWIC-3G-GSM card in? If it is slot 1, then you will have to type
show cellular 0/1/0 all
If it is slot 0, then it won't work because HWIC-3G-GSM card is not supported on slot 0
In 2801 router HWIC cards are only supported only in slot 1 and slot 3
05-07-2009 05:16 AM
IOS looks good, try another slot.
Here's a sample config:
interface Cellular0/2/0
bandwidth receive 3600000
ip address negotiated
ip access-group 100 in
ip virtual-reassembly
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer idle-timeout 180
dialer string GSM
dialer-group 1
async mode interactive
no ppp lcp fast-start
ppp chap hostname cisco@wwan.ccs
ppp chap password 0 123456
ppp ipcp dns request
crypto map
chat-script GSM "" "ATDT*98*1#" TIMEOUT 60 "CONNECT"
access-list 1 permit any
dialer-list 1 protocol ip list 1
line 0/2/0
access-class 100 in
exec-timeout 0 0
password 0 xxxxxx
script dialer GSM
login
modem InOut
no exec
transport preferred none
transport output none
rxspeed 3600000
txspeed 384000
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide