Unanswered Question
Dec 4th, 2008


I am currently have an issue with an HWIC-AP-G-A installed in a 2811 Router. Every hour or so, wireless clients are unable to authenticate to the dot11radio anymore, and the only thing that fixes the problem is a reboot.

I am running c2800nm-advsecurityk9-mz.124-22.T.bin.

I have seen some posts where a 877 has had similar problems, but have not found a fix to this.

Can anyone confirm that this is a code problem? If so, which code version has this been fixed in, if fixed at all?

Thank you for the input.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
drolemc Wed, 12/10/2008 - 14:48

Some cards have issues associating & the ssids may not be broadcast. This is only a problem for some types of PCs/drivers.

ahelms Thu, 12/11/2008 - 09:49

I have the same problem with an 1841 router. Finally found a TAC engineer that could help. He said there were bugs in the 12.4(22)T code. He suggested downgrading to 12.4(20)T


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode