cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
376
Views
0
Helpful
2
Replies

Cisco 2811 DOT11-7-CCKM_AUTH_FAILED: HWIC-AP-G-A

Jasonch518_2
Level 1
Level 1

Hello,

I am currently have an issue with an HWIC-AP-G-A installed in a 2811 Router. Every hour or so, wireless clients are unable to authenticate to the dot11radio anymore, and the only thing that fixes the problem is a reboot.

I am running c2800nm-advsecurityk9-mz.124-22.T.bin.

I have seen some posts where a 877 has had similar problems, but have not found a fix to this.

Can anyone confirm that this is a code problem? If so, which code version has this been fixed in, if fixed at all?

Thank you for the input.

2 Replies 2

drolemc
Level 6
Level 6

Some cards have issues associating & the ssids may not be broadcast. This is only a problem for some types of PCs/drivers.

ahelms
Level 1
Level 1

I have the same problem with an 1841 router. Finally found a TAC engineer that could help. He said there were bugs in the 12.4(22)T code. He suggested downgrading to 12.4(20)T

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: