12-04-2008 04:06 PM - edited 07-03-2021 04:51 PM
Hello, i'm configuring 3 AP 1131, with 2 profile Guest and Inoffice. the 3 AP are going to be connected to a 3560 and they are going to have Vlan and a 2811 is going to be configured as a DHCP.now all i can see when i search for available network is the guest SSID and if connect i don't get any Ip address. Any idea. I'm attaching the AP config. Thanks.
12-05-2008 03:07 PM
Hello, so i have setup MBSSID like below,but still my AP broadcast only one SSID,any suggestion?
dot11 ssid EP_Internal
vlan 3
authentication open
mbssid Guest-Mode
!
dot11 ssid EP_Guest
vlan 4
authentication open
mbssid Guest-Mode
!
interface Dot11Radio0
mbssid
no ip address
no ip route-cache
12-06-2008 07:48 AM
do you have both ssid's enabled under your d0 interface?
interface dot11radio0
ssid EP_Internal
ssid EP_Guest
There's a decent example of an mbssid config here: http://slaptijack.com/networking/cisco-broadcasting-multiple-ssids/
If that's not enough to get you working, post your whole config here.
12-07-2008 01:29 PM
Yes I do ,below the config. thanks
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname AP_01
!
!
clock timezone GMT -5
!
!
dot11 vlan-name Data vlan 3
!
dot11 vlan-name Data vlan 4
!
dot11 ssid EP_Internal
vlan 3
authentication open
Guest-Mode
!
dot11 ssid EP_Guest
vlan 4
authentication open
guest-mode
power inline negotiation prestandard source
!
!
Username Cisco password Cisco
!
class-map match-all _class_Data0
match ip dscp default
!
!
policy-map Data
class _class_Data0
set cos 0
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
!
ssid Internal
!
ssid Guest
!
speed basic-1.0 basic-2.0 5.5 11.0 18.0 24.0 36.0 48.0 54.0
power local cck 17
power local ofdm 17
power client 17
channel 2412
station-role root
l2-filter bridge-group-acl
!
interface Dot11Radio0.668
encapsulation dot1Q 668 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.3
encapsulation dot1Q 3
service-policy input Data
service-policy output Data
no ip route-cache
bridge-group 3
bridge-group 3 subscriber-loop-control
bridge-group 3 input-address-list 701
bridge-group 3 block-unknown-source
no bridge-group 3 source-learning
no bridge-group 3 unicast-flooding
bridge-group 3 spanning-disabled
!
interface Dot11Radio0.4
encapsulation dot1Q 4
service-policy input data
service-policy output data
no ip route-cache
bridge-group 4
bridge-group 4 subscriber-loop-control
bridge-group 4 input-address-list 700
bridge-group 4 block-unknown-source
no bridge-group 4 source-learning
no bridge-group 4 unicast-flooding
bridge-group 4 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
hold-queue 160 in
!
interface FastEthernet0.668
encapsulation dot1Q 668 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.3
encapsulation dot1Q 3
no ip route-cache
bridge-group 3
no bridge-group 3 source-learning
bridge-group 3 spanning-disabled
!
interface FastEthernet0.4
encapsulation dot1Q 4
no ip route-cache
bridge-group 4
no bridge-group 4 source-learning
bridge-group 4 spanning-disabled
!
interface BVI1
ip address xxx.xxx.x.x 255.255.255.0
no ip route-cache
!
ip default-gateway xxx.xxx.x.x
no ip http server
!
!
bridge 1 route ip
!
line con 0
password cisco
login
!
line vty 0 4
password cisco
login
!
line vty 5 15
password cisco
login
!
transport output all
!
end
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide